Avdel TX2000 Bedienerhandbuch PDF herunterladen (Seite 16)

Pressure Switch Assembly

General Assembly of Base Tool 74201-12000

• Remove Casing Cover 92.

• Using spanner remove Rear Casing 91.

• Remove Spring 90 and Spring Retainer 89 from Regulator 93.

• Loosen Grub Screw 94 to allow Regulator 93 to be unscrewed from Rear Casing 91.

• Remove Spring 87 from Piston 83 and pull out Piston 83 which will release Cylinder 86 with three ‘O’ Rings 52, 53 and 84.

• Pull out Liner 85 with three ‘O’ Rings 80.

• Remove Plug 82 from Lip Seal 81 located in the main tool body.

• Remove Lip Seal 81 noting orientation.

• Replace seals and parts as required.

• Assemble in reverse order of dismantling.

Item numbers in bold refer to the Parts List on page 15.

Pressure Switch Removal

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Avdel TX2000 Bedienerhandbuch Seite 16